The automatic strapping machine is simple and easy operation, but wide range of applications and high work efficiency, especially when work with carton sealer. The principle is a machine that bundle a product or package with plastic strap, then tightens and fuses both ends through a thermal effect. There are many kinds of automatic strapping machine, including horizontal carton strapping machine and pallet strapping machine, which can be packed as independent equipment and often as an important link in the packaging production line. As to ensure that the package will not be scattered because it is not firmly fastened during transportation and storage. So it plays a very important role in saving manpower and improving production efficiency, How to ensure the long-term use of the automatic strapping machine?
Low-cost and high-efficiency automatic strapping machine
Attentions about maintaining the automatic strapping machine
First of all, we need to formulate rules and regulations for the cleaning and maintenance of the automatic strapping machine, and record the maintenance of the strapping machine every time. The working surface of the automatic strapping machine needs to be cleaned before or after use; the belt should also be clean; there are also fragile parts, such as blades, irons, etc., which also need to be cleaned.
Secondly, according to the use of the machine, it is necessary to preheat the ironing head of the strapping machine to ensure that the machine can complete the packaging work.
In addition, when using the automatic strapping machine, the operator needs to pay attention to the use of the strapping machine at all times. In case of abnormal noise or failure of the automatic strapping machine, the power supply should be turned off in time to prevent accidents.
The Semi Automatic Strapping Machines
The most important part of adjusting the automatic strapping machine
When adjusting the heating head of the automatic strapping machine, please do not set the temperature too high, otherwise it will affect the bonding of the machine. After being used for a long time, the operator needs to lubricate all parts of the machine to ensure that the machine can work properly.
Finally about the daily maintenance of the automatic strapping machine.
When the workshop staff are repairing the automatic strapping machine, they have to record the fault of the machine every time for later inquiry. When operating the machine in the workshop, the operator should be careful not to put his hand into the machine while the machine is working, so as to avoid danger. Also operators need to use compressed air to clean the dusty and tip parts of the machine before leaving work every day; scrape off the hot slag on the iron block with a blade; and clean the dirt on the exhaust fan of the heating head.
0 Comments
Post a Comment