Motorized Turning Curved Conveyor
Turning curved conveyor is widely used, which can enable the conveyor to realize horizontal turning, up and down turning, combined turning and up and down slope operation (the belt pressing function can be realized in the up and down slope operation to prevent the production of streamers).
Turning curved conveyor is widely used, which can enable the conveyor to realize horizontal turning, up and down turning, combined turning and up and down slope operation (the belt pressing function can be realized in the up and down slope operation to prevent the production of streamers).
Application range of turning curved conveyor
The turning conveyor can consider using the reversing system when the following situations occur.
1. In a transportation system, when multiple belt conveyors are needed or large slides must be laid, it is most suitable to use reversing because of the bending of the transport roadway.
The system can implement labor-saving, power-saving, equipment-saving and electricity-saving control.
2. After the use of the reversing system, the belt conveyor can share a head, a belt storage device and a tensioning device before and after turning, so that the distance between the tail and the corner can be very large. Short (the shortest can only be about 4 meters), so that there is no trouble in the final mining because the belt conveyor is too short to be laid, which greatly improves the work efficiency.
3. When driving the roadway, using the reversing system to extend the belt conveyor to the heading head can replace the trouble caused by laying slippers. In this way, it can save labor, electricity and maintenance.
The turning conveyor can consider using the reversing system when the following situations occur.
1. In a transportation system, when multiple belt conveyors are needed or large slides must be laid, it is most suitable to use reversing because of the bending of the transport roadway.
The system can implement labor-saving, power-saving, equipment-saving and electricity-saving control.
2. After the use of the reversing system, the belt conveyor can share a head, a belt storage device and a tensioning device before and after turning, so that the distance between the tail and the corner can be very large. Short (the shortest can only be about 4 meters), so that there is no trouble in the final mining because the belt conveyor is too short to be laid, which greatly improves the work efficiency.
3. When driving the roadway, using the reversing system to extend the belt conveyor to the heading head can replace the trouble caused by laying slippers. In this way, it can save labor, electricity and maintenance.
Main features of turning curved conveyor
1.Save investment: save the head, tail, slipper, electric control and other equipment investment.
2. Reduce personnel: no special personnel on duty, reduce the number of jobs, increase the safety factor.
3. Energy saving: the equipment does not need power, reduces the installed capacity and saves a lot of power consumption.
4. Cost reduction: the equipment has the advantages of simple structure, time-saving, power-saving, labor-saving, and greatly reducing the operating cost.
5. Simple maintenance: it is very convenient to check and replace the small satellite regularly.
6. Convenient installation: there is no need to increase the height and length of the roadway.
1.Save investment: save the head, tail, slipper, electric control and other equipment investment.
2. Reduce personnel: no special personnel on duty, reduce the number of jobs, increase the safety factor.
3. Energy saving: the equipment does not need power, reduces the installed capacity and saves a lot of power consumption.
4. Cost reduction: the equipment has the advantages of simple structure, time-saving, power-saving, labor-saving, and greatly reducing the operating cost.
5. Simple maintenance: it is very convenient to check and replace the small satellite regularly.
6. Convenient installation: there is no need to increase the height and length of the roadway.
Basic principle of turning conveyor
The basic principle of the turning conveyor is to realize the steering of the transmission through the asymmetrical main and driven shafts, together with the corresponding belt and transmission shaft.
They can achieve the effect of steering by single motor or multiple motors.
At present, there are three main ways to turn to the conveyor in the market:
1.Belt steering conveyor, using circulating flexible belt and “convex” conveyor shaft for steering action.
2. Chain block turning conveyor, because the characteristic of chain block conveying is that the chain blocks that make up the conveying are movable, so they can freely achieve the steering effect.
3. Conveyer shaft turning, The conveying shaft is machined into an asymmetric effect from coarse to fine, so that the steering effect can be achieved when the product moves on this kind of conveying.
The basic principle of the turning conveyor is to realize the steering of the transmission through the asymmetrical main and driven shafts, together with the corresponding belt and transmission shaft.
They can achieve the effect of steering by single motor or multiple motors.
At present, there are three main ways to turn to the conveyor in the market:
1.Belt steering conveyor, using circulating flexible belt and “convex” conveyor shaft for steering action.
2. Chain block turning conveyor, because the characteristic of chain block conveying is that the chain blocks that make up the conveying are movable, so they can freely achieve the steering effect.
3. Conveyer shaft turning, The conveying shaft is machined into an asymmetric effect from coarse to fine, so that the steering effect can be achieved when the product moves on this kind of conveying.
0 Comments
Post a Comment