shrink wrapper

                                                  Heat Shrink Wrap Machine

Heat shrink Wrap machine adopts the world’s advanced film constant temperature heat sealing technology, and the seal is clear and firm. The sealing fast cooling structure ensures higher sealing strength under the condition of high-speed production. The induction switch controls the film feeding system, reliably controls the film feeding length and reduces the loss. All conveying is frequency conversion speed regulation, and the conveying is smooth and smooth. Waiting for heat shrink channel, two sets of centrifugal hot air circulation system, uniform heat balance, shrinkage fastening, beautiful. Three-layer heat insulation treatment, good heat preservation performance, fast heating up, energy saving.


Enhanced cooling channel, but the packaging film quickly becomes a high-strength state, which is convenient for storage and transportation. When the package combination and bottle type are changed, it is convenient to adjust, and the function of multi-purpose can be realized.

the film material is easy to shift at heat shrink wrap machine

First, the heat shrink wrap machine in the packaging production, the film material is easy to shift and can not be fed normally, which will make the heat-shrinkable packaging machine can not heat shrink the object normally, then the position of the film roll and the tension balance rod can be adjusted, if both are invalid, it can be solved by adjusting the angle of the upper triangle. If the upper membrane material deviates from the clamping bar, the upper triangular plate can be adjusted clockwise, and if the lower membrane material deviates from the clamping chain, the upper triangular plate can be adjusted counterclockwise. So we can solve it this malfunction problem

the packaging part heating up slowly or can not heat

Second, the heat shrink wrap machine in the packaging production, the packaging part heating up slowly or can not hit the standard packaging temperature (more than 160 degrees Celsius), the emergence of this problem can make the packaging can not achieve the desired packaging purpose.
The heating process depends on the heater, so the main power circuit of the heater should be checked first. the circuit of the heater is that the main wire passes through a magnetic absorption switch and then to the electric heating pipe, so it should first check whether the contacts of the magnetic absorption switch are normal. 

detail solution (heat shrink wrap machine)

A. If the circuit does not pass through one of the phases, a phenomenon will occur.
B. If the magnetic switch is normal, check the meter again to see if each phase is the same as the ohmic value of the machine.
C. If normal, it should be a short circuit.
D. If all phases are connected but the line or heating pipe is still abnormal, the heater needs to be replaced.




the machine can not detect the packaged object

Third, in the multi-object cluster packaging, the equipment can not detect the packaged object, causing damage to the packaging, so that the packaging work can not be carried out, this situation occurs because, when the heat shrinkable film packaging machine is carrying out cluster packaging, the gap between the objects affects the electric eye detection, so it is only necessary to adjust the electric eye detection angle of the heat shrink packaging machine to the bevel to avoid the above phenomenon.


The main reason for the out-of-control failure of the shrinkage temperature of the heat shrinkage packaging machine is that the thermometer is broken and needs to be repaired, and the thermal power may also be broken, which can not normally transfer the induction temperature to the thermometer.
Just replace it with thermocouple of the same type and specification.