Carton Sealer Machine Operation
Carton sealer machine is widely used in various industries, as one of the most common packing machines in the market at present. Almost all production enterprises involving packing will use the sealing machine instead of manual sealing, which not only saves labor but also greatly improves efficiency. Many friends will not use it reasonably after buying carton sealer machine, improper use may lead to damage to the machine, in order to better use the equipment. Please allow SNCPACK to share a brief introduction to the correct use of carton sealer machine:
1. Make good preparations for the operation of carton sealer machine.
Carton sealer machine needs to open the roll of the tape cutter, put the whole tape into the tape cutter, and fix the tape roll with a fixed core.
2. The steps of tapes installation are important to carton sealer machine
Then pull the front part of the entire tape so that the gap between the front axle and the lower shaft of the tape cutter passes through the bottom of the tape. To make the tape slide smoothly, make sure the tape is sticky face down.
3. Don't ignore the details in the carton sealer
The next step is to gently pull the small square in front of the tape, pull down a piece of tape, and then lift the blade slightly and pull back to cut the thick tape. It is common sense that more pressure is needed when cutting.
4. Try more and accumulate more operation experience of carton sealer machine
Because the sizes of the carton are different, and the thickness and viscosity of the tape are different as well, so you need to have some flexibility when operating the sealing machine. According to your own feeling, you can tighten or loosen the tension adjustment button of the tape cutting machine, so as to better control the bonding degree of the tape.
As a kind of mechanical equipment, it is very normal to break down in use carton sealer machine. Here are some ways to deal with common problems.
A. Problems caused by mechanical adjustment of carton sealer machine
The clamping action of carton sealer is too slow or insufficient clamping stroke: the bolt is loose, the front buckle or the plate is worn, you can tighten the bolt to confirm the exact setting of the front buckle shaft, and after using the replacement front buckle or plate to complete these actions, you can test the function. If the stroke length is too short, you can fine-tune the front buckle shaft upward, if the action is slow, you can fine-tune the front buckle shaft downwards.
B. Problems caused by damage to accessories of carton sealer machine
1.Piston rod leakage: the bottom ring of the body is damaged and needs to be replaced.
2.Exhaust leakage: switch valve ring or switch seat ring damage or piston ring damage.
3.Trigger leakage: the switch valve ring or switch seat ring is damaged.
4.The transmission ring is loose and cannot be positioned: the plastic steel bar and the transmission spring are not elastic, disassemble the machine assembly, reinstall the spring end, or replace and install the steel electric spring.
The above is only a list of some common sealing machine operation and troubleshooting, other details need to consult the supplier’s professional engineer, sealing machine technology is very mature, for users, only need to pay attention to whether they can buy this kind of sealing machine from professional suppliers, because they pay more attention to the details of mechanical manufacturing. SNCPACK has nearly 20 years of experience in packing machine production, please follow us, we will update more content for reference
0 Comments
Post a Comment