Automatic Sealing machine is easy to be understood, in fact, the operation of this equipment is very simple, with suitable for different specifications of goods for film packaging, flexibility is very strong, practicality is also very high, especially some small specifications of commodity packaging, the effect is very good, but also easy to carry, so it is increasingly recognized and recognized by consumers.
Corresponding fault method of unsealing tangent position offset out of center
1.Adjust the position of the sealing tool holder (automatic sealing machine)
the position of the sealing tool holder of the automatic sealing machine is not ideal, so the sealing tool holder can be adjusted higher or lower to the right position.
2.Adjust the height of the conveying belt of the automatic sealing machine
the height of the conveying belt of the automatic sealing and cutting machine is too high or too low, it can be adjusted to a higher or lower point, and it must be in the right position;
3.Adjust the size of the film bag (automatic sealing machine)
if the heat shrinkable film bag is too large relative to the product size, the size of the film bag can be reduced.
4.Adjust the circulating wind direction of the heat shrinking machine (after automatic sealing machine)
the circulating wind direction of the heat shrinkable film shrinking machine is not understood, and the angle of the circulating wind direction should be re-adjusted.
Problem 2. When the package shrinks, it will be extruded and deformed by thermal shrinkage.
The corresponding method to release the deformation that will be extruded by thermal shrinkage:
1.Adjust the conveying speed of the heat-shrinkable packaging machine
speed up the conveying speed of the heat-shrinkable packaging machine to prevent the temperature from being too high
2.Please use a heat-shrinkable film with low shrinkage tension
the shrinkage tension of the heat-shrinkable film is too large to be suitable for the package
3.Adjust the temperature of the heat shrink packaging machine
the temperature of the heat shrink packaging machine is set too high to reduce the temperature to the right position.
0 Comments
Post a Comment